Microcement maintenance
- Home
- Microcement maintenance
How to take care of microcement?
Initial maintenance
Microcement reaches its maximum hardness, chemical resistance and water resistance after one month of application. Particular care should be taken during the first two weeks, when the risk of damage is greatest. After two days of application, it is safe to step on the coating and after a week of microcement application, it is safe to walk freely. During the first two weeks, do not cover the coating with anything, including paint or carpet.
Special care
Maintenance of microcement flooring is similar to that of natural wood flooring. Although the coating is waterproof, it is important to avoid prolonged contact with moisture, e.g. wet towels (especially if they are spillable), rags, buckets, etc. It is very important that the surface is not exposed to materials such as stones or sand which may scratch the microcement. In order not to damage the coating, friction with hard and heavy objects must be avoided, for example, if it is necessary to move furniture, it should not be dragged but lifted and carefully moved to a new location. If the furniture has sharp or metal legs, we recommend using special white rubber pads. If microcement has been applied to the work surface, never place hot pots and pans directly on the surface, use special supports.
Specialty care
For cleaning floors and other microcement-finished surfaces, we recommend using specialised cleaning products designed for the care of decorative coatings. Mild, pH-neutral cleaning products are suitable for everyday cleaning. Concentrated cleaning products should be diluted with water before use according to the manufacturer's instructions. For removing tough and stubborn stains, professional cleaning products suitable for microcement surfaces can be used. Before use, we recommend testing the product on a small, inconspicuous area of the surface.
Attention! Extra care should be taken during the first few weeks after microcement application. Wet cleaning with cleaning products should only begin once the protective coating has fully cured, in accordance with the manufacturer's recommendations. The use of harsh cleaning products is strictly prohibited. Chlorine-based products, bleach, ammonia, strong acids, alkalis, and abrasive cleaners must not be used on microcement surfaces. Even when using pH-neutral cleaning products, it is not recommended to leave soapy solutions on microcement surfaces for extended periods. After cleaning, any remaining cleaning product should be removed with clean water, and the surface should be dried if necessary. It should also be noted that the rougher the microcement texture, the better its slip-resistant properties may be, although such surfaces can be more difficult to clean. For indoor spaces, we recommend choosing smoother surfaces that are easier to maintain on a daily basis. For outdoor areas and wet rooms, finishing systems with appropriate slip-resistant properties should be used.
Periodic care
To maintain the aesthetic appearance and extend the lifespan of microcement surfaces, we recommend periodic maintenance using specialised protective products compatible with the installed material system. Depending on the type of protective coating, specialised maintenance products can be used to help maintain and restore the surface’s protective properties. These products help reduce surface wear, make future cleaning easier, and preserve the coating’s original appearance. For maintaining floors in high-traffic areas, we recommend using professional protective products with increased resistance to mechanical wear. In certain cases, specialised acrylic-based protective products can be used to create an additional protective layer with a subtle sheen. These products should only be used if they are compatible with the existing protective coating.
Important! Before using any additional protective products, make sure they are compatible with the installed microcement system. Incorrectly selected maintenance products may alter the surface’s appearance or damage the protective coating. Regular cleaning, careful use, and timely renewal of the protective coating when necessary help maintain the beauty and durability of microcement for many years.